1.
Product introduction
Built-in Can rear view camera is through the acquisition vehicle Can network data on the steering wheel rotation, and then converted to the corresponding trajectory camera images
.
Th
e
product contains most of the models cars (in the appendices form has included)
which
help
s
the driver to easily park
ing
vehicles
.
2.Product specification
Chip sensor |
PC3089 |
Image format |
Ntsc |
Effective Pixel |
720 * 480 |
Working voltage |
12V |
Working temperature |
-20ºC~70ºC |
Working humidity |
15-65%RH |
Storage temperature |
-30ºC~75ºC |
3.Installation Guides:
1.Install the camera on the suitable position.
2.The power extention wire connect to camera red DC port.The other end,red small line connect to back light
anode,black line to back light cathod.
3.Six- meter control line connect to back camera video AV port,and control -red line connect to back light
anode.The other end connect to reverse video input of navigator or display screen.Red small line connect to
reverse detection signal line of navigator.
4.Let OBD wire connect to car OBD test port(usually on the lower left of the steering wheel), then start the
car,access to the reverse gear
4.Accessories:
1) Extention wire of video AV line
2) Power extention cable
3) OBD extention cable
4) Instruction book